Accessories

  • Home
  • Service Categories
  • Accessories
Residual Field Indicator

Residual Field Indicator RFI

Residual Field Strength Indicator For MPI Residual Field Strength Indicator For MPI Meter to check field strength on Demagnetization Range -Gauss -3 to +3 A Dial Type Residual Magnetic Field Indicator, of Range 0 to 3 Gauss, for measurement of effectiveness of demagnetizing operation during Magnetic Particle Inspection Method. Specification Operating Range: up to 3 […]
Read More
General Purpose Cleaner 1408-2

Rotating ARM Yoke

AC Rotating ARM Yoke This is a light weight AC Yoke for Crack Detection By Magnetic Particle Inspection Method C-Shaped Electromagnet, operating on AC. One of the legs is ‘Rotating’ type i.e. the leg rotates through 360º around the axis. Adjustable distance between poles 50 mm to 300 mm Weight of yoke is approximate 3 […]
Read More
General purpose cleaner

General Purpose Cleaner

General Purpose Cleaner 1408/2 Fast evaporating, non-aqueous liquid for general purpose cleaning of Components for Dust, Grease, Oil and other stains. Leaves no residue after use. The General Purpose Cleaner is available in Aerosol Can only. Specification Name – General Purpose Cleaner Product Code – 1408/2 Packing Unit – 420 ml in Aerosol Can. Standard […]
Read More
UVA LED Torch

UVA LED Torch

UVA LED Torch UVA LED Torch is light weight, handy source for UVA light, which is generally used for inspection in NDT techniques such as MT and PT and for checking leakage. Specification Availability Intensity of Torch when measured at 5 inches from the front of the filter to the face of sensor is more […]
Read More
Aluminium Comparator Block side angle..

Aluminum Comparator Block

Aluminum Comparator Block Test Piece to evaluate efficiency of Penerant in LPI Imported Product from Japan One Pair is available in a Box. Specification Availability Name – Aluminum Comparator Block Product Code – 362 Al-Com bocks are manufactured by M/S Eishin Kagaku Co., Japan. FerroChem represents Eishin Kagaku for sale in India. The Blocks are […]
Read More
Ni Cr Panel

Ni Cr Panel 10 Micron / 20 Micron / 30 Micron / 50 Micron

Ni-Cr, (Nickel Chrome) Panels 10 Micron / 20 Micron / 30 Micron / 50 Micron Test Panel for assessment of sensitivity of dye penetrants. These are the panels with Nickel Chromium alloy plating of controlled thickness, on which the cracks are generated artificially. Used for checking sensitivity of the Penetrant and for comparison of different […]
Read More
UVA LED Assembly

UVA LED Assembly

UVA LED Assembly UVA LED Light source for testing defects on Ferrous and Non-ferrous products. While testing by Magnetic Particle Inspection Method and Liquid Penetrant Inspection Method. Assembly has ‘Diffuse’ lamp, results into spreading intensity over Large Area. UVA LED Assembly for NDT Inspection. UVA Light Wavelength 365nm. Specification UVA Light Intensity : More than […]
Read More
Details Copper Mesh Pad

Copper Mesh Pad

Copper Mesh Pads Contact pads, of copper mesh to establish proper contact to pass magnetizing current without generating heat or sparking in Crack Detection By Magnetic Particle Inspection Method. Used to establish firm contact and elimination of sparking of component during magnetization. Specification Name – Copper Mesh Pad Single Layer / Double Layer Product Code […]
Read More
Glass Centrifuge Tube Fluo. Non Fluo..

Glass Centrifuge Tube Fluo. Non Fluo

Glass Centrifuge Tube Fluorescent / Non Fluorescent For assessing settling volume of magnetic particles in a ‘bath’ in magnetic particle Inspection Method. 100 ml capacity pear shaped glass centrifuge tube for measuring settling volume, bath concentration of wet fluorescent and non-fluorescent magnetic particle inspection method. Specification Name – Glass Centrifuge Tube Fluorescent / Non Fluorescent […]
Read More
Test Oil 2204

Test Oil

Oil based suspension medium for Magnetic powders Oil based suspension medium for Magnetic powders used for crack detection using Magnetic Particle Inspection Method. Colorless and Odorless, Low Sulphur and Chlorine oil to be used as Suspension Medium for both Fluorescent and Non-Fluorescent Particles for crack detection by Magnetic Particle Inspection Method. Specification Name – Test […]
Read More

We understand the importance of approaching each work integrally and believe in the power of simple.

Melbourne, Australia
(Sat - Thursday)
(10am - 05 pm)

Penetrant Testing | Crack Detection Machine | Dry Penetrant Test | Dye Penetrant Inspection | Dye Penetrant Suppliers & Manufacturers | Dye Penetrant Test | Ferrochem Black 140C | Ferrochem Luminous 133c | Ferrochem Luminous Supreme Ready Bath | Ferrochem Red 146 A | Fluorescent Magnetic Powder | Fluorescent Penetrant Inspection & Test | Fluorescent Yellow MPI Powder | Liquid Dye Penetrant Testing | Liquid Penetrant Inspection | Liquid Penetrant Testing Equipment | Liquid Penetrant Testing Materials